福彩3d四版软件
Product display
→ Pluviometer series

JD10 tipping bucket




1 Overview
The instrument for measuring precipitation of an instrument, its performance conforms to the national standard GB/T11832-2002 "tipping bucket" and the national standard GB/T11831-2002 "hydrology telemetry gauge" requirements.
The key component of the instrument is a three dimensional streamlined design, which makes the bucket turn over water more smoothly, and has the function of self cleaning dust and easy cleaning.

2 structure and characteristics
As shown in Figure 1, the instrument by the rain mouth 1, 2, 3, water filter funnel bucket bracket 4, tipping bucket 5, skip shaft sleeve 6, an inclination adjusting device 7, a level adjusting device 8 and a constant 9, 10, magnetic reed switch signal output terminals 11, 12, 13 base drainage funnel 14, stainless steel barrel, a base supporting feet 15. The tipping bucket support 4 is equipped with a tipping bucket shaft sleeve 6 and a round horizontal bubble, a reed tube bracket and a signal output terminal.
Unlike other tipping bucket, bucket sleeve of the instrument is the integration of the rotary positioning structure, skip 5 by skip shaft installed in the sleeve of the jewel bearing 2, the bucket assembly and disassembly of the more convenient, but also no longer need to adjust the distance between the two sleeve, for on-site installation convenient.
The turning bucket of the instrument is a three dimensional streamline design, and the design has a drop type cambered surface diversion tip, which has beautiful appearance, smooth flow, better water turnover performance and easy cleaning and maintenance.
The water diversion funnel and the tipping bucket support of the instrument are arranged in close coordination, and the water diversion funnel is not needed to be removed in general.
Water diversion channel components funnel, skip and imported high quality transparent material funnel drainage of the instrument, the instrument dynamic working process is more clear.
The tipping bucket is provided with two permanent magnet of the instrument, there are two dry reed reed instrument factory steel bracket is provided with the dry reed pipe is adjusted in the appropriate coupling distance, the output signal and the number of flip bucket instruments have the definite proportion of. One of the two outputs of the instrument is used as field metering, and the other is used as telemetry information. The instrument and telemetry terminal connection, should be equipped with interface circuit, and to prevent the reed switch jitter and counting, caused by the rebound of the news error dump.
This instrument has been factory bucket angle adjustment screw to lock in the best position and angle of inclination of point screw made red paint seal treatment, site installation instrument only when the tipping bucket in accordance with the relevant requirements of this manual will be installed in the bucket bucket bracket 2 sleeve and tipping bucket the level of global support level is located in the center position can be put into use, do not have to live and then adjust the tipping bucket angle.

3 main technical parameters
3.1 socket diameter: Phi 20000.60mm; sharp edge angle: 40o ~ 45 o
3.2 resolution: 1mm;
3.3 measurement accuracy: less than 3% (indoor artificial precipitation, the displacement of the instrument itself.)
3.4 rain intensity range: 0.01mm ~ 4mm/min (allowed to pass the maximum rain intensity 8mm/min)
3.5 signal mode: double touch point break signal output
3.6 working environment:
Ambient temperature: 0~50 C
Relative humidity; <95% (40)
3.7 size weight: 2.5kg

TOP】【PRINET】【CLOSE


The official WeChat
About us News information Product display Online Message Contact us
Contact: manager Zhang
Mobile phone: 18952121514
http://www.sutrr.tw
Address: 4th floor,C2-A,Xuzhou Software Park,East Jinshan Road,Xuzhou City,Jiangsu Province,China
Copyright © 2017 Xuzhou Weiser Water Affair Science & Technology Co.,Ltd. All Rights Reserved Web DesignXZDELI.COM
Online ServiceClose
Online Service Online Message Click here to send me a message Click here to send me a message Click here to send me a message
Customer Service Hotline:

0516-83859755

QQ customer service
福彩3d四版软件 国标麻将下载 4455444大众图免费印刷图库6 青鹏棋牌官网 123开奖现场直播本港台直播 辽宁35选7开奖走势图 香港开奖直播本港台开奖直播 广西快乐双彩中奖公告 北京快乐飞盘玩法 彩票下载app送29 时时彩12选五开奖结果走势图